Because we are completely aware of the sensitive nature of the information that is passed to us through the Internet we've incorporated Secure Transmissions of ALL data that is submitted to us through our web site. Our use of a 128-bit RSA Data Encryption Engine ensures the strictest confidence and hopefully eases any worries that you may have about the information you provide during your job search being seen by the wrong set of eyes.


        
       Guests Since
    February 1, 2000


Electrical Controls Engineer
Electrical Engineer with 5+ yrs controls and Power. This is a Controls Engineer that designs controls and programs, put controls on Equipment, moving equipment like one of the following: moving equipment on the shop floor or deck of an oil rig or off shore platform (ex: cranes or hoists), has a beeper back up system (Backhoe, Bulldozer, Track hoe, Fork truck, Loader, Dump truck, Ditcher, Bobcat). Must have done controls for large equipment, like cranes or winches or hoists.

National Sales Representative Multiple locations: TX, PA, FL, and East Coast. Leading Environmental Lab Sales Opportunity for National Company. Excellent company with established Customers seeks Sales Rep with some following and establish customers as well and good knowledge of doing business with DoD/EPA. Develop accounts and grow the business, both established retaining and competing to gain New Accounts. Securing new Accounts and Agreements with a major international Department of Defense consulting firms. Technical degreed (Chemistry BSChE, Biology or related to chemicals) Sales professional. 5-20 + years minimum sales experience with petrochemical and environmental consultant industries preferred with experience in the EPA/DoD business. Base salary, commission, car allowance. Knowledgeable of EPA testing methods a plus.

Technical Sales Representative with environmental laboratory sales experience.
Salary range: $60-85K + quarterly bonuses, complete car allowance, laptop, etc.
Should make: $80-$100K + +++ and excellent Benefits

The Territory Baton Rouge/ New Orleans will be filled first.

Physical locations: Baton Rouge/ New Orleans, Houston, and/or Houston and Austin

Leading Environmental Lab Sales opportunity for technical degreed sales professional. Minimum 2 years sales experience with petro/chemical and enviro/consultant industries preferred. Base salary, commission, car allowance. Knowledgeable of EPA/Environmental testing methods a plus.

Seeking: Technical Sales Representative with environmental laboratory sales experience.

Ideal candidate: would have a strong client base of petro/chemical plant, environmental engineering, federal clients and would be willing to work independently in an office, which would have a courier to pick up samples in all locations.

Skills: need 3 years technical sales experience, preferably a science related degree, self- starter, etc. Base salary range $60- 80K Base+ quarterly bonuses, complete car allowance, laptop, etc.

We would be honored for you to pass this on to any of your colleagues you feel may be interested in this excellent opportunity.

Barbara Badon
Badon?s Employment, Inc.
5422 Galeria Drive
Baton Rouge, LA 70816
225 295 1240
225 295 3972 fax
resumes@Badon.com
http://www.badon.com
http://www.refineryengineers.com

Chemicals Manufacturing Consultant
Base Salaries: Low: $120K Midpoint: $160K USD, [Range max $273K] + Tax free uplift, COL adjustment, tax protected $.
ARAMCO IS MOVING INTO THE PETROCHEMICAL BUSINESS in a BIG way!!!! ($95B Capital Budget for new Plants)
Saudi Aramco, long known for its leadership in oil exploration, production, and refining, is seeking experienced professionals to join our growing Chemicals
Business Team. We have an immediate requirement for experienced chemicals manufacturing consultants. Of primary interest is experience in olefins, polyolefins, and aromatics. Saudi Aramco's position as a world leading energy producer offers unique opportunities for downstream integration. Soon, Saudi Aramco will be known not just for energy, but as a leading supplier of materials for today's lifestyles. Consider the opportunity to join our team and help shape the future of the chemicals industry!

The Chemicals Manufacturing Consultant will have a thorough understanding of plant operations, process technologies, supply and product logistics, business drivers, cost drivers, and feedstock sensitivities. Have working knowledge of chemicals markets and dynamics. Have detailed understanding of product properties, customer applications and requirements

Principle responsibilities include:
Advise joint ventures on all aspects of operational excellence
Make recommendations for technical/economic optimization of existing facilities
Lead feasibility/profitability studies for new chemicals facilities
Advance profitable chemicals growth projects
Perform due diligence for manufacturing sites in support of M&A
Propose technical feasibility of new products
Lead strategic product development trials at manufacturing sites
Conduct competitive cost analyses for regional and target market competitors
Develop a long term process technology outlook and recommend strategic alternatives
Contribute to Business Unit strategy; advise regarding capacities, technology/product mix capabilities, technological trends, and potential leveraging improvements
Train future manufacturing experts in all aspects of the business
Minimum Requirements: BS in Chemical Engineering. An MS is preferred. Minimum of 10 years of chemicals manufacturing experience, plus or including 10 years in related chemicals business, supply chain, or technology roles

??? Long-term family status in safe Western Compound w/ schools, hospitals, golf country club, beach, yacht and horse clubs, 40 hour work week, little travel, 42 days vacation w/ airfare, etc. Full major co. benefits, world's finest retirement pkg., etc. Western style homes at very little cost. Great place to raise kids...super private schools, no crime, no drugs. Contact me for details. Co. has never had a dangerous incident in any of their compounds in 60 years. Note Client has mandatory retirement at 60. A senior guy who spends 10+ years before early retiring from this company, at current $ rates, can easily return to the USA w/ $2-8+ million in his pocket as a result of their paid or low cost COL items, savings plan and their retirement program.

Barbara Badon
Badon?s Employment, Inc.
5422 Galeria Drive
Baton Rouge, LA 70816
225 295 1240
resumes@Badon.com
http://www.badon.com
http://www.refineryengineers.com
Online Application:
https://www.notarypublic.com/secure/badonsemployment/form.cfm? marked=&CFID=1051051&CFTOKEN=35617238

Industrial Sales
Strong industrial company, a leader in its field is seeking degreed account manager with management potential to sell Top-of-the Line Products to end users in engineering and construction companies, chemical and petrochemical manufacturers and associated markets, such as refining, fine chemicals, oil & gas, pulp & paper, etc.. Background to include knowledge of relationships between these industries and supplier with opportunity to promote Top-of-the Line Products by establishing strong customer base through your knowledge and expertise of these necessary Top Products. Experience is preferred but not necessary, degree in business, marketing, construction or science related discipline and your ability to maintain strong relationship with customers is the key. Salary $80- 100K, plus car, plus bonuses, plus excellent benefits package. All expense paid by client-company.

Sr. Maintenance / Reliability Engineer
Major worldwide chemical manufacturer is seeking a Senior Maintenance/Reliability Engineer. This is an excellent world-class, Award-winning organization with 7 plants in the Southeast US. They take an interest in the communities they inhabit, with a long-term view, holding themselves to the highest standards of transparency, integrity and accountability. By following sustainable business practices, they gain operating efficiencies, improve management performance, and increase the positive impact of their operations.
Position Responsibilities:
- Will investigate equipment problems and design modifications to improve reliability, productivity and safety using failure analysis to determine root cause and recommend improvements.
- Will develop new equipment specifications based on the requirements of the production and maintenance departments, draft requests for quotes, review supplier quotations and make recommendations for purchase.
- Assist with equipment repairs of stationary and rotating equipment by working with manufacturers, OEM-s, and outside repair shops.
- Project planning of major equipment upgrades by determining requirements, writing specifications, obtaining quotations, and manage and monitor projects progress executed by company personnel or outside service providers.
- Creates equipment repair procedures.
- Responsibility for Site Mechanical Integrity Program.
- Communicate the results of incident and equipment failure investigations.
- Give guidance on material selection for maintenance and capital replacements.
- Determine recommended replacement schedule to avoid end-of- life failure between turnarounds.
- Submit equipment replacement/upgrade items in capital or major maintenance budgets.
- Assist with development and Quality Control of critical weld procedures
- Complete a fit for service review for all critical equipment.
- Design and review use of leak repair devices such as clamps, wire wraps, cans
- Review/Approve any deviations from plant specifications, codes, standards, best practices, etc. (Management of Change)
- Assist in guiding and developing critical equipment repair procedures.
- Develop inspection and repair plans/procedures for all critical equipment.
- Perform calculations, equipment selection, equipment specification, system design in AutoCAD, system layout, field investigation, development of project budget, and construction administration
- Coordinating and planning all plant wide electrical shut downs for maintenance.
- Supervising and directing mechanical/construction contractors and employees on maintenance and projects.
- Creating and maintaining Mechanical Integrity programs and procedures consistent with the NEC, NFPA, and OSHA standards.
- Providing technical support and training to Inspection Group.
- Assist in RCFA on all mechanical failures.
- Responsibility for compliance with all mechanical codes, standards, regulations and industry best practices (ASME, API,ANSI, OSHA)
Required Qualifications
- Bachelor Degree from accredited university in Mechanical Engineering or Metallurgical Engineering
- 3-10 years or more experience in Maintenance engineering, Process Safety Management with emphasis in Mechanical Integrity program.
- Thorough understanding of ASME Boiler, Pressure Vessel and Piping Codes.
- Knowledge of high temperature/pressure metallurgy
- Knowledge of corrosion resistant metallurgies.
- Experience with plant design and project engineering a plus.
- Excellent written and oral communication skills, organizational and planning skills, facilitation skills, computer skills and the ability to achieve results through others.
- Flexible, analytical and detailed oriented.
- Ability to manage multiple projects at one time.
- Willingness to work extended hours, particularly during scheduled outages
- Willingness to participate on corporate teams and assist other locations (some travel required)
- Willingness to participate in on call weekend and holiday coverage
Sr. Maintenance / Reliability Engineer
Major worldwide chemical manufacturer is seeking a Senior Maintenance/Reliability Engineer. This is an excellent world-class, Award-winning organization with 7 plants in the Southeast US. They take an interest in the communities they inhabit, with a long-term view, holding themselves to the highest standards of transparency, integrity and accountability. By following sustainable business practices, they gain operating efficiencies, improve management performance, and increase the positive impact of their operations.
Position Responsibilities:
- Will investigate equipment problems and design modifications to improve reliability, productivity and safety using failure analysis to determine root cause and recommend improvements.
- Will develop new equipment specifications based on the requirements of the production and maintenance departments, draft requests for quotes, review supplier quotations and make recommendations for purchase.
- Assist with equipment repairs of stationary and rotating equipment by working with manufacturers, OEM-s, and outside repair shops.
- Project planning of major equipment upgrades by determining requirements, writing specifications, obtaining quotations, and manage and monitor projects progress executed by company personnel or outside service providers.
- Creates equipment repair procedures.
- Responsibility for Site Mechanical Integrity Program.
- Communicate the results of incident and equipment failure investigations.
- Give guidance on material selection for maintenance and capital replacements.
- Determine recommended replacement schedule to avoid end-of- life failure between turnarounds.
- Submit equipment replacement/upgrade items in capital or major maintenance budgets.
- Assist with development and Quality Control of critical weld procedures
- Complete a fit for service review for all critical equipment.
- Design and review use of leak repair devices such as clamps, wire wraps, cans
- Review/Approve any deviations from plant specifications, codes, standards, best practices, etc. (Management of Change)
- Assist in guiding and developing critical equipment repair procedures.
- Develop inspection and repair plans/procedures for all critical equipment.
- Perform calculations, equipment selection, equipment specification, system design in AutoCAD, system layout, field investigation, development of project budget, and construction administration
- Coordinating and planning all plant wide electrical shut downs for maintenance.
- Supervising and directing mechanical/construction contractors and employees on maintenance and projects. - Creating and maintaining Mechanical Integrity programs and procedures consistent with the NEC, NFPA, and OSHA standards.
- Providing technical support and training to Inspection Group.
- Assist in RCFA on all mechanical failures.
- Responsibility for compliance with all mechanical codes, standards, regulations and industry best practices (ASME, API,ANSI, OSHA)
Required Qualifications
- Bachelor Degree from accredited university in Mechanical Engineering or Metallurgical Engineering
- 3-10 years or more experience in Maintenance engineering, Process Safety Management with emphasis in Mechanical Integrity program.
- Thorough understanding of ASME Boiler, Pressure Vessel and Piping Codes.
- Knowledge of high temperature/pressure metallurgy
- Knowledge of corrosion resistant metallurgies.
- Experience with plant design and project engineering a plus.
- Excellent written and oral communication skills, organizational and planning skills, facilitation skills, computer skills and the ability to achieve results through others.
- Flexible, analytical and detailed oriented.
- Ability to manage multiple projects at one time.
- Willingness to work extended hours, particularly during scheduled outages
- Willingness to participate on corporate teams and assist other locations (some travel required)
- Willingness to participate in on call weekend and holiday coverage

Manager of Engineering - Baton Rouge, LA $120-165K

Position Summary
The Manager of Engineering will be responsible for providing technical and project leadership for the Company. The Manager of Engineering will lead and develop the engineering and technical resources necessary for the company to successfully execute major projects and operate its assets safe and efficiently for a midstream pipeline and storage company.

Key Relationships
Reports to: Executive Vice President, COO
Direct report areas: Project Engineering, Drafting
Other key relationships: Commercial and Operations Staff, ROW and Land, Safety and Compliance
Major Responsibilities and Key Selection Criteria
- A high energy individual that is capable of developing and executing major midstream opportunities; has a sense of urgency to perform and an ownership mentality that pervades his area of responsibility.
- Leads, develops and measures performance of his direct reports. Is a confident and committed leader who will be able to motivate and provide clear direction in fast paced project environment.
- A forward looking Project Manager who plans and anticipates potential issues with both projects and existing operations. An Engineer with a proven track record of managing major projects.
- Role model for compliance with safety, quality and technical assurance procedures. Manages contractors to ensure compliance with the Company's Policies and Procedures.
Capable of focusing on and prioritizing the key issues;
- Knows how to listen as well as empower and lead
- Commercial savvy with a clear customer focus; an individual capable of successfully working with customers, contractors, regulators and other stake holders to deliver major projects.
CANDIDATE SPECIFICATION: KEY SELECTION CRITERIA

Ideal Experience
- Pipeline and/or Gas Gathering and Processing experience is ideal. Salt dome storage and/or natural gas storage experience would be beneficial.
? 12 to 15 years experience delivering major midstream projects, including leading multidiscipline engineering teams. Significant Project Management experience is required.
- Some direct midstream operating experience would be ideal
- Undergraduate engineering degree in chemical or mechanical engineering.
- An advanced technical degree or MBA would be a plus.
Critical Competencies
The Company is well positioned for rapid growth by acquisition and project development due to its existing operations in a very important petrochemical and industrial area, its existing customer base, and its relationships with external constituents and investors. The Manager of Engineering will be successful by utilizing his skills and abilities in the following areas:
- Project Management: A seasoned Project Manager who has successfully led major midstream projects through both on the design and execution phases.
- Manages the preparation of project specifications and capital cost estimates
? Responsible for HSE implications of projects.
- Initiates proposals for improvements to project procedures and practices.
- Carries out larger and complex project activities and/or participate as a member of a project team for very complex projects. May lead a large multi disciplinary project
- Ensures optimal safety, reliability, operability, maintainability, cost effectiveness and timing through all phases of the projects
- Leads a large project team with multi-disciplinary aspects, including multi site aspects. Aligns organizations around a common purpose to maximize value to the project or business.
- Building relationships across the organization based on trust, respect and rapport by learning the business quickly, reaching out, having good listening and problem-solving skills, a strong sense of self-awareness and flexibility.
- Assesses the capabilities and services of suppliers and contractors. Negotiates and/or participates in contract negotiations depending on the size of the contract.
- Leads designs of large or complex equipment or systems. Ensures that all technical aspects and approved new developments are accounted for in design.
- Ensures verification of technical assurance, budget, and schedule are maintained for complex equipment and system projects
- Evaluates economic aspects of equipment or systems to meet project requirements. Defines budget and planning for all phases of project
- Communicates to contractors and internal/external customers of projects with complex issues
- Is accountable for the progress and outcome of major projects against milestones, commercial targets and budgetary constraints
- Operational Focus: An operationally strong engineer who can evaluate and recommend improvements to the Companies existing operations by:
- Evaluates current and anticipated operations from both process and maintenance standpoints to ensure the overall safety and efficiency of the Company assets.
- Works closely with Operations staff to insure integration with brown field projects.
- Solicits input from Operations staff regarding all aspects of project planning, execution, commissioning and ongoing operations.
- External Focus: A highly motivated engineer with strong communication skills who can represent the Company externally by:
- Demonstrates a sound understanding of technical matters, of commercial criteria that drive the project, of contractual matters, and of political sensitivities that influence the project.
- Identifies new business opportunities within own field of expertise in line with agreed business plans
- Interacts proactively with customers, investors, strategic partners, suppliers, regulators, industry analysts, and customer associations/councils to gain information and present the Company's goals and capabilities; a natural networker.
- Maintaining awareness of the industry and ongoing dynamics of contractors and suppliers.

Barbara Badon
Badon's Employment, Inc.
5422 Galeria Drive
Baton Rouge, LA 70816
225 295 1240
Resumes@Badon.com
http://www.badon.com/
http://www.refineryengineers.com/

Online Application:
https://www.notarypublic.com/secure/badonsemployment/form.cfm? marked=&CFID=1051051&CFTOKEN=35617238

We are a US National Recruiting Firm based in Louisiana, catering mainly to the Drilling, Offshore, and Reservoir, Refining and Petrochemical Industries in the Gulf of Mexico Corridor, although also serving locations all over the country and worldwide. We have many positions open for Degreed Engineers for Major Companies with experience in the Chemical, Petrochemical and Oil Refining Industries.
Our Clients need Chemical Engineers, Mechanical Engineers and Electrical Engineers among others with experience with Oil Refining, Chemicals, Specialty Chemicals, Plastics, Polymers, Packaging, etc.
We have positions for Degreed Engineers with Good GPA's and up to 30 + years of experience.

Refinery Inspector - Baton Rouge / New Orleans area $110-$140K
The inspector will be primarily responsible for development of equipment inspection plans for turnaround and on-stream inspections, analysis of inspection data, reporting plant-wide inspection program status and coordination of inspection work with turnaround planning group prior to, and during, shutdowns. At other times, will be responsible for the inspection of various types of fixed equipment including, tanks, structural steel, heaters, pressure vessels, heat exchangers, boilers and piping. The inspector will document and report findings and develop recommendations.
Responsibilities:
- Develop and execute inspection plans for fixed equipment based on service, design, condition, jurisdictional requirements and inspection history.
- Review recommendations based on inspection findings, options and risk assessments with Management, Operations and Maintenance.
- Participate in root cause analysis.
Qualifications:
The qualified candidate will possess at least seven years of experience in a refinery inspection role. Additionally, the candidate must have a strong understanding of all applicable codes and must hold certifications in API 653, API 510, and API 570. Inspector candidates must have strong interpersonal skills and be proficient in Microsoft Office products, mainframe systems, PacketPro, and Meridium.

REFINERY PLANNING ENGINEER The role: Saudi Aramco Oil Supply & Planning Department (OSPAS) is looking for a dynamic refinery planning engineer to work in the general area of refinery planning with specific emphasis on developing short-term, medium-term and long-term plans. Also required will be updating and maintaining the linear program (LP) models and providing ad hoc analysis using the LP models.
OSPAS provides an unrivalled environment for creativity and innovation in the downstream sector by developing cost-effective solutions to meeting the production and distribution of refined products throughout the Kingdom of Saudi Arabia. It offers the successful applicant a unique workplace in which to further expand technical and professional skills underpinned by a strong commitment to training and personal development.
Key Responsibilities:
- Organize, prepare, and execute a short-term (4 months), medium- term (1 year) and long-term (10 year) plan using Aspentech PIMS.
- Review the accuracy of the LP models for each refinery on a monthly basis by performing model reconciliation and backcasting analysis. This will require trips to each refinery to work with refinery engineers.
- Work on ad hoc studies when they arise by running the LP models.
- Develop and modify planning reports written in Microsoft Excel using Visual Basic for Applications (VBA).
Minimum Requirements: BS in Chemical Engineering.
Experience: 10 or more years of refining experience. 7 or more years refinery planning experience using Aspentech PIMS. Experience with Microsoft Excel and the Visual Basic for Applications (VBA) programming language.
Long-term family status in safe Western Compound w/ schools, hospitals, golf country club, beach, yacht and horse clubs, 40 hour work week, little travel, 42 days vacation w/ airfare, etc. Full major co. benefits, world's finest retirement pkg., etc. Western style homes at very little cost. Great place to raise kids...super private schools, no crime, no drugs. Contact me for details. The Co. has never had any dangerous incident in any of their compounds in 70 years. Note Client has mandatory retirement at 60. A senior guy who spends 10+ years before early retiring from this company, at current $ rates, can easily return to the USA w/ $3/5 + million in his pocket as a result of their paid or low cost COL items and their retirement program.

Oil Supply Planning & Scheduling Engineer Saudi: Base $140/240K +o'seas pkg, tax protected, savings & super retirement progs. Family status, career jobs. Mandatory retirement @ 60: want cand w/ 10 yrs left to work Lady fine if unmarried.
POSITION DESCRIPTION: Specific Requirements: Candidate should be an Oil and Gas Engineer who is familiar with oil/gas production, processing, and transportation. Should be able to review existing oil (and gas) pipeline networks and facilities and propose projects after developing sound business case. Should be able to initiate studies, review and evaluate projects in the Oil and Gas systems including pipelines. Must have Bachelor degree in Chemical Engineering with 10 years experience in oil processing and handling. (preferably with economics or business master degree).
General Requirements: Plans, schedules and provides work direction as required for preparation of designs, processes, reports, correspondence and related data and assures the efficiency, adequacy and conformance to overall objectives of all phases of very complex engineering problems. Support the development and formulates the basis for engineering studies in any of several basic or special engineering fields by analyzing and evaluating all data pertinent to problems. Evaluates data as to scope, effect on existing installations, economic value, long range planning and budgetary considerations. Leads the activists of project proposal that include development of scope, functions, interrelationship, integration, physical solution definition, cost estimate, etc. Leads project execution for project proposal, initiatives, studies and continuous improvement of solutions and Problem solvers. Initiates detailed work outline and makes decision as to basic approaches, processes and/or equipment. Performs work and/or delegates work to other engineers for final development of specialized or technical proposals and proposed projects. Brings all elements of a project together, makes certain that all elements proceed satisfactorily on schedule and within the money allowed; and initiates corrective action as required. Reviews cost estimates, recommendation from vendors, consultants, and licensors. Discusses, coordinates and resolves problems with personnel throughout Aramco and subsidiaries and with outside of company organizations. Acts as technical consultant when required. Recommends new installations or modifications to improve existing facilities and standardization within broad fields of endeavor. Estimates costs, prepares justifications and completes expenditure requests as required. Reviews work of engineers directed. Checks that reports are written according to established methods of good report presentation. Takes recommendations for further study or report changes. Approves reports for transmittal to supervisor. Develop scope and description of technology items, and leads the implementation and operation of developed solutions in the field.

Process Modeling Specialist
Saudi: Base $100/140K +o'seas pkg, tax protected, savings & super retirement progs. Family status, career jobs. Mandatory retirement @ 60: want cand w/ 10 yrs left to work Lady fine if unmarried.
POSITION DESCRIPTION: Company is seeking an Engineering Specialist whom will have proven ability to develop Process Simulation Models of the Companies Oil & Gas Industry and/or Refinery Processes.
- Essential Job Functions: Incumbent will be expected to analyze and reconcile Data and develop process models in HYSYS and/or PROII and/or Aspen Plus. Incumbent will be requested frequently to develop Reactor Models using AspenTech Technology and/or integrated models in RefSys will be an advantage. In support of the Companies strategy to integrate engineering and business software, will be required to develop LP Planning models from time to time. Should be able to use these models to support Design Studies, Debottleneck Studies, and PIMS Planning Models. Incumbent will be required to convert steady state models to dynamic models. Will be asked to provide technical support to resolve difficult simulation problems that process engineers in the plants or in central engineering have difficulty with. The candidate will represent the Company and publish his work at internationally recognized conferences.
SELECTION CRITERIA: MS degree in Chemical Engineering with 7-10 years experience using Process Simulation as part of his day to day work, with detailed knowledge of one or more Process Simulator (HYSYS preferred) . Incumbent should have extensive knowledge (5 to 10 years) of either the Oil & Gas Industry and/or Refinery. Should be able to carry out technology evaluation studies and make recommendations to Management on technology selection. Knowledge of LP Planning Techniques is preferred. It is a plus if knowledgeable with pipelines simulation such as Pipephase, Olga, or Stoner. Incumbent must have excellent written and verbal English skills with experience in developing standards and technical reports. Incumbent should possess excellent computer skills. Has published several technical papers in international recognized journals and conferences.
COMMENTS: Process and Control System Department (P&CSD) provides specialized technical engineering studies and consultations for corporate operations, capital programs, and to advance corporate profitability objectives through engineering standards, Best Practices, simulation modeling and application of new and emerging technologies. The Pipeline and Simulations unit of P&CSD is responsible for promoting and implementing new simulation technologies, developing process and pipeline models, providing second level support for process engineers in issues related to modeling and simulation, conducting technical engineering screening studies, developing standards and best practices within and develops and disseminates knowledge throughout the company.

Production Engineer (Tulsa) $150-180K
Department Description
Brief Description
Responsible for production operations and surveillance for multiple producing fields. Develop and implement production optimization strategies, oversee work over and recompletion programs, management of construction projects, production engineering support for prospective property acquisitions, and work with production foremen and field personnel on a daily basis.
Detailed Description
" Provide flowback monitoring and recommendations
" Well Surveillance and recommendations to Operations Personnel
" Optimization of Production Costs, Processes, etc...
" Artificial Lift Planning, Design, recommendations and optimization
" Recompletion and wellwork recommendations
Job Requirements
" Working knowledge of reservoir, drilling and geology sufficient to allow effective interaction and support in these areas as it relates to current operations and acquisition review and evaluation.
" Ability to work in a multi-discipline team environment where technology and individual responsibility are emphasized.
" Excellent communication skills, both written and verbal.
" Must adapt interaction with a variety of contacts, both internal and external.
" Ability to interface with a multi-disciplined team on prospect evaluations and development options.
Additional Details
" Responsible for oversight/supervising special project work performed by contract personnel.
" A minimum of a B.S. in Petroleum Engineering.
" 10 years of experience
" Demonstrate achievements in generating value.
" Normal office environment
" May require 10-15% travel to field locations and offshore production platforms

Reservoir Engineer (2-3 positions in Houston) $150-170K
Summary:
The individual in this role will be responsible for performing/coordinating the reservoir engineering and economic analyses necessary to maximize the value of existing assets, as well as actively participate in the identification, evaluation and execution of new investment opportunities.
Essential Functions:
- Leadership role in the identification, evaluation, planning and execution of resource play focused growth strategies. Perform reserve and economic evaluation of drilling, recompletion, workover, acquisition and other oil and gas investment opportunities.
- Coordinate and perform field studies to identify, evaluate recommend and execute optimized field exploitation plans for existing assets
- Monitor well performance, identify data collection needs and make project recommendations as necessary to maximize value/efficiency
- Prepare reserve/economic analysis for year end SEC reserve reporting on existing assets
- Prepare production, capital and operating expense forecasts for annual budgets
Job Requirements:
Knowledge, skill, and abilities:
- Must posses 10 - 15 years of recent industry Reservoir Engineering experience with expertise in tight/shale gas resource quantification, well performance analysis, reserve estimation and economic/risk analytics. - Must be business minded and prepared to manage the business aspects of an asset(s).
- Must be self-motivated, have a thirst for knowledge, and be receptive to new ideas and approaches.
- Experience in a leadership role working in a multi-discipline team environment, emphasizing technology and individual responsibility with demonstrated achievements in value creation.
- Experience in conducting play performance statistical analysis and identification of key performance correlations.
- Experience in oil and gas acquisition evaluations.
- Knowledgeable of SEC reserve reporting guidelines and their application.
- Experience in west Texas and/or south Texas operations
- Experience in reservoir simulation.
- Must have excellent oral, written and formal presentation communication skills.
- Experience in conducting integrated field studies, the development of optimized field exploitation plans and the identification of growth opportunities
- Experienced in well optimization and the identification of opportunities for production and reserve increases.
- Adept at interaction with a variety of contacts, internal and external, including management, industry partners and auditors.
Minimum qualifications
- Bachelors of Science Degree in Petroleum Engineering
Additional Details
Supervisory responsibilities
- Mentor and direct inexperienced engineers and technicians
Working conditions
- Normal office environment/some travel to field operations may be required.

Reservoir Engineer (2 positions in Tulsa) $150-170K
Summary:
The individual in this role will be responsible for performing/coordinating the reservoir engineering and economic analyses necessary to maximize the value of existing assets, as well as actively participate in the identification, evaluation and execution of new investment opportunities.
Essential Functions:
- Leadership role in the identification, evaluation, planning and execution of resource play focused growth strategies. Perform reserve and economic evaluation of drilling, recompletion, workover, acquisition and other oil and gas investment opportunities.
- Coordinate and perform field studies to identify, evaluate recommend and execute optimized field exploitation plans for existing assets
- Monitor well performance, identify data collection needs and make project recommendations as necessary to maximize value/efficiency
- Prepare reserve/economic analysis for year end SEC reserve reporting on existing assets
- Prepare production, capital and operating expense forecasts for annual budgets
Job Requirements:
Knowledge, skill, and abilities:
- Must posses 10 - 15 years of recent industry Reservoir Engineering experience with expertise in tight/shale gas resource quantification, well performance analysis, reserve estimation and economic/risk analytics.
- Must be business minded and prepared to manage the business aspects of an asset(s).
- Must be self-motivated, have a thirst for knowledge, and be receptive to new ideas and approaches.
- Experience in a leadership role working in a multi-discipline team environment, emphasizing technology and individual responsibility with demonstrated achievements in value creation.
- Experience in conducting play performance statistical analysis and identification of key performance correlations. - Experience in oil and gas acquisition evaluations.
- Knowledgeable of SEC reserve reporting guidelines and their application.
- Experience in west Texas and/or south Texas operations
- Experience in reservoir simulation.
- Must have excellent oral, written and formal presentation communication skills.
- Experience in conducting integrated field studies, the development of optimized field exploitation plans and the identification of growth opportunities
- Experienced in well optimization and the identification of opportunities for production and reserve increases.
- Adept at interaction with a variety of contacts, internal and external, including management, industry partners and auditors.
Minimum qualifications
- Bachelor?s of Science Degree in Petroleum Engineering
Additional Details
Supervisory responsibilities
- Mentor and direct inexperienced engineers and technicians
Working conditions
- Normal office environment/some travel to field operations may be required.
Reservoir Engineer (4 positions in Denver) $150-170K

Reservoir Engineer
Summary:
The individual in this role will be responsible for performing/coordinating the reservoir engineering and economic
analyses necessary to maximize the value of existing assets, as well as actively participate in the identification,
evaluation and execution of new investment opportunities.
Essential Functions:
- Leadership role in the identification, evaluation, planning and execution of resource play focused growth strategies. Perform reserve and economic evaluation of drilling, recompletion, workover, acquisition and other oil and gas investment opportunities.
- Coordinate and perform field studies to identify, evaluate recommend and execute optimized field exploitation plans for existing assets
- Monitor well performance,
identify data collection needs and make project recommendations as necessary to maximize value/efficiency
- Prepare reserve/economic analysis for year end SEC reserve reporting on existing assets
- Prepare production, capital and operating expense forecasts for annual budgets
Job Requirements:
Knowledge, skill, and abilities:
- Must posses 10 ? 15 years of recent industry Reservoir Engineering experience with expertise in tight/shale gas resource quantification, well performance analysis, reserve estimation and economic/risk analytics.
- Must be ?business minded? and prepared to manage the business aspects of an asset(s).
- Must be self-motivated, have a thirst for knowledge, and be receptive to new ideas and approaches.
- Experience in a leadership role working in a multi-discipline team environment, emphasizing technology and individual responsibility with demonstrated achievements in value creation.
- Experience in conducting play performance statistical analysis and identification of key performance correlations.
- Experience in oil and gas acquisition evaluations.
- Knowledgeable of SEC reserve reporting guidelines and their application.
- Experience in west Texas and/or south Texas operations
- Experience in reservoir simulation.
- Must have excellent oral, written and formal presentation communication skills.
- Experience in conducting integrated field studies, the development of optimized field exploitation plans and the identification of growth opportunities
- Experienced in well optimization and the identification of opportunities for production and reserve increases.
- Adept at interaction with a variety of contacts, internal and external, including management, industry partners and auditors.
Minimum qualifications
- Bachelor?s of Science Degree in Petroleum Engineering
Additional Details
Supervisory responsibilities
- Mentor and direct inexperienced engineers and technicians
Working conditions
- Normal office environment/some travel to field operations may be required.

Production/Operations Engineer - Deepwater Gulf of Mexico $90 - 120K
Location Houston, TX, US
Brief Description
Responsible for production operations and surveillance for producing fields in deepwater Gulf of Mexico. Develop and implement production optimization strategies, oversee initial well completions, work over and recompletion programs, management of construction projects, production engineering support for property acquisitions, and work with production foremen and field personnel on a daily basis.
Detailed Description
Essential Functions:
- Prepare Production and LOE budget for deepwater producing properties and manage LOE with Area Production Foreman
- Provide Long Term Operations Plan for Producing Properties. Set Expected Rates, Target Costs and Performance Criteria
- Provide cost estimates for well work, production facility construction and abandonment
- Optimize the Utilization of Assets including Wells, Equipment, Platforms, Pipelines, etc.
- Take lead role in the safety and environmental compliance and ensure that the Company?s Safety and Environmental Management Plan objectives are met
- Work with Land / Legal on negotiating production handling, operating and equipment lease agreements
- Evaluate and recommend production enhancement operations
- Manage production facility engineering, procurement, installation and removal
- Provide production surveillance and recommend required operations to meet production and OPEX targets

Knowledge, skills and abilities
- Working knowledge of petroleum reservoir and drilling engineering and geology
- Ability to work in a multi-discipline team environment where technology and individual responsibility are emphasized.
- Excellent communication skills, written and verbal. Must adapt interaction with a variety of contacts, both internal and external.
- Interface with asset team providing input to prospect evaluations, well design and development options. Supervisory responsibilities
- Responsible for oversight/supervising both company and contract personnel performing field operations.
Working conditions
- Normal office environment ? casual but driven
- Occasional travel to field production and contractor locations offshore
- Disciplined, goal-oriented workforce
Job Requirements
- A minimum of a B.S. in Petroleum Engineering.
- 10-15 years of experience in deepwater production engineering
- Demonstrated achievements in generating value.

Facilities Engineer
Brief Description
Oversight of all midstream construction activities in Mid Continent; setting priorities, monitoring progress, developing future plans ?staying ahead of the drilling?.
Detailed Description
- Review ?midstream? contracts and agreements including transportation, treating, processing, dehydration, compression, etc. and offer technical comments, suggested language and intent for the benefit of the company.
- Monitor compliance of all terms contained in Construction, Operating and Gathering Agreements.
- Monitor measurement accuracy and provide guidance and support of Measurement program ? Mid Continent.
- Perform audits when necessary and negotiate settlements.
- Provide coordination and serve as liaison between asset teams, operations, legal, production accounting, accounting, and marketing to insure proper interpretations and compliance with contracts and proper allocation of production.
- Serve as ?corporate asset? to assist corporate home office and other business units as needed regarding midstream contract development, operations, facility design, and cost estimating. - Mentor younger or less experienced engineers in midstream activities (pipeline design, compressor sizing, treating, processing, etc.)
Job Requirements
- Field experience with pipeline contractors overseeing construction activities (inspector).
- Field Operations experience with pipelines, compression, dehydration and treating.
- Familiarity with E & P / Midstream gathering, transportation, treating and processing contracts; technical and commercial aspects of the agreements.
- Understanding of measurement, gas quality and settlement statements.
- Experience with gathering system hydraulic modeling; how to do it, what it tells you, and benefits
- Experience with writing and administering contracts for services, construction and equipment
- Be able to identify midstream opportunities as they arise in E & P operations (compressor and equipment downsizing, consolidation of gathering pipelines, etc., )
- Understand economic models, rates of return, NPV, etc.
- Understand LOE and capital budgeting process and impacts on cash flow - Possibly some personnel supervision
- Understanding of information needed by midstream operators, when they need it, and how to get it from within the company.
- Good computer skills
- Good interpersonal skills (important in working with operations engineers, asset team members, marketing, land, legal, field superintendants, etc.)
- Familiarity with DOT Part 192 design and operations criteria for pipelines
- Familiarity with pipeline ROW agreements, settlements and land owner issues
- Pipeline and facility project management (be able to design, estimate costs, procure materials, contract and oversee all types of midstream related projects)

Area Maintenance Manager - Louisiana $95-125K

? Communicates with subordinate managers, superintendents, supervisors and maintenance contractor representative for prioritizing significant maintenance activities and gives required direction and/or support.
? Develops, implements and administers policies related to complex maintenance and reliability. Plans and directs the following activities: Complex maintenance to include mechanical equipment.
? Reviews, as needed, the standard operation Procedures, Preventive/Predictive Maintenance Plans and the subsequent revisions, submitted by subordinate managers, superintendents, and supervisors. Monitors plant maintenance activities by reviewing Daily Operations Morning Reports and Daily Direct Report Contact with Maintenance Manager and/or Maintenance Superintendents, at each site.
? Reviews, as needed, SAP purchasing requisitions for spare parts, tools/materials for maintenance projects and services, office supplies and furniture/equipment, etc., originated from the Maintenance Department. Reviews quotations from vendor, if requested, by Vice President, Manufacturing. Reviews and directs actions to improve/reduce maintenance expense costs, weekly.
? Supervises preparation of yearly expense budget for Area Maintenance Department. Reviews and controls budget monthly by using Management Report (KPI?s). Discusses with subordinates, and Accounting Supervisor to locate any deviations and works out required actions.
? Supervises preparation of yearly capital budget, as needed, for Area Maintenance Department and submits to Vice President, Manufacturing. Reviews detail AFE?s submitted by subordinates and forwards to Vice President, Manufacturing for approval. Monitors the implementation of Maintenance AFE projects after approval.
? Reviews, as needed, questionable payments to contractors, vendors, or warehousing, concerning freight charges or maintenance services.
? Attends plant Steering Committee Meetings, Staff Meetings and, and Central Safety Committee Meetings. Attends Weekly Maint. Review Meetings and chairs Quarterly Maintenance Strategic Review Meetings. Attends special project meetings assigned by Vice President, Manufacturing as required. Attends local Users' Council Meeting.
? Supports, by example, the maintenance?s portion of the HS&E and Quality programs/systems.
? Proactively develops and reviews the organization for all complex Maintenance and interviews candidates to fill the proper position as situation arises.
? Reviews daily, weekly, monthly, quarterly, and yearly Area Maintenance reports submitted by subordinate.
? Contacts, with Purchasing involvement, outside contractors/vendors seeking new materials, tools, equipment or techniques to improve the performance of area maintenance equipment.
? Coordinates, with training department, to plan programs for the technical/skills/human resource development of the employees of the Area Maintenance/Reliability Department.
? Develop and review goals/targets performance, quarterly, and provide an appraisal for each salaried of maintenance employee, yearly.
? Performs special projects, as assigned, by the Vice President, Manufacturing, to ensure cost effective complex maintenance services.
? Perform duties in a manner that protects personal safety as well as the safety of all personnel on site. Whenever appropriate, promptly report Safety, Health or Environmental incidents or issues to management so the situation can be corrected. Attend Monthly Safety Meetings to help prevent off site and job accidents.

Oil Refinery Project Engineer, Louisiana - $85-105K
Bachelor of Science in Engineering required. Minimum two years engineering and project management experience in a refinery or petrochemical operating environment required. Must have the ability to work in a team environment, use a computer with extensive knowledge of SAP, Office XP and MS Project. Icarus experience preferred. Ability to prepare small mechanical and civil designs, such as pressure vessel calculations, simple structural design and analysis and foundation design preferred.
Will develop, design, and perform cost estimation and prepare Authorization for Expenditure (AFE) for capital and expense projects per process design. Prepare specifications, procure materials and equipment, and perform cost tracking and status reports for assigned projects. Supervise contract personnel for engineering, design, and installation of capital, expense and maintenance projects. Provide technical support to all refinery departments and ensure a safe, efficient, and timely execution of projects. Follow all safety rules and guidelines established by the Refinery and participate in safety meetings, safety programs, field safety audits, and VPP inspections.
Must have the ability to speak, walk, see, climb structures of 100' or more, stoop, kneel, reach, balance, crawl, work in confined areas, lift 20 or greater pounds, work in extreme temperatures, around moving equipment, subject to loud noise, dust, dirt, chemicals and odors. Must have the ability to wear fire retardant clothing and protective gear required. Must have the ability to take 24 hour call, travel by common carrier, work extended hours, and make presentations to groups. Must be able to pass the pre- employment requirements including but not limited to a background check, drug test and application for TWIC.
Candidates with higher qualifications will be considered for higher level position.
____________________________________ Saudi Arabia ? Major Oil Company

Base $85/150K +o'seas pkg, tax protected, savings & super retirement programs.
Family status, career jobs. Mandatory retirement @ 60: want guys w/ 10 yrs left to work, American or Canadian citizens!! Not green card type visas.

CONTRACTS ADVISORS
MINIMUM REQUIREMENTS:
EDUCATION: BS in a Business or Engineering discipline. MBA is desirable. EXPERIENCE: (10) years experience in the petroleum or related industries with related experience in operational area. A minimum of 3 years of progressively responsible work or contact with auditing, accounting and contracting techniques and procedures is desirable. A high level of fluency in oral & written English is essential. Ability to motivate subordinate professional people and to communicate both orally in writing with professional level people in other fields and senior and executive management both within and outside the Company.

DUTIES/RESPONSIBILITIES: Performs all functions common to the work Director Level as established by Management. Provides complex technical advice and support to contract proponents form the conception of contract service requirements through the execution of a contract to the termination of the contract or service requirements. Directs and participates in the development of engineering and financial studies that establish feasibilities for contract services and evaluation for alternatives that may be technical, financial and/or procedural/administrative. Coordinate and/or participates in the development of a professional level of analysis of company risk or exposure. Coordinate and/or participates in the development of a professional level of analysis and technical qualification of bidders. Coordinates and/or participates in the development if scopes of work for various contract services. Develops professional-level presentations to Executive management and makes presentations or participates in the presentation to Services Review committee. Participates as the contract proponent representative or delegates participation on the Bid Review Team charges with development of a realistic company position on contract term and the negotiation of these terms. Participates as the contract proponent representative in a professional analysis of bid response and negotiation offers and preparation of counter offers. Negotiates with contractors as part of a negotiating team comprised of Contracting and contract proponent representatives. Coordinates or participates in the preparation of responses to contract claims and represent the proponent on claims review panels. Coordinates pr participates in the verification of contractor costs and the preparation of the cost escalation of de-escalation amendments. Provides proponent representations in the administration of contracts and works with finance, law and contracting in the development of financial and legal advice on intent of wordings, scopes of services of others clauses that may impact quality of service, cost of services and cost benefit relationships. Recommends changes on contracting procedures or contract format for presentation to the contracting Department, comments to finance and senior management's controls to prevent abuses, conflicts or excessive company risk/exposure. Perform miscellaneous related duties as requested.

Instrument Engineers - Need 5
Successful candidate will be expected to: Have Experience with design and construction of oil & Gas Facilities and related Projects. Plan, schedule and provide work direction as required for preparation designs, possess, reports, correspondence and related data and assurance the efficiency, adequacy and conformance of overall objectives of all phases of very complex engineering problems. Formulate the dosing basis by collecting, analyzing information and date relative to operating requirements, process economic considerations and such other pertinent factors as may be involved as a preliminary step in support of proposals for new construction modification or maintenance to equipment. Study mechanical modification to gas processing, gas handing and utility facilities. Occasionally called upon to design mechanical aspects of new faculties as requested. Participate in construction activities, pre-commissioning, commissioning and function test activities for the new projects. Follow and inspect the construction progress of assigned projects assuring conformance with design specifications, codes and standard, recommend or confirm design changes material and equipment substitutes. Review design packages. Interface with the Project Management Teams (PMT) Consulting Services & Inspection Departments, capital project contractors, equipment manufactures and Saudi Aramco proponents. Perform a variety of related work such as initiating reports, correspondence and faxes relative to assigned projects , assembling performance date and conduction studies relative to the development procumbent or adaptation of equipment , interpreting the mining and application of codes and standards , reviewing operating procedures and safety instruction , acting and safety instructions, acting as technical consultant on operating problems. Assist other engineers in the solution of problems outside their specialty.

MINIMUM REQUIREMENTS: Education: B.S. Engineering. Experience: Ten (10) years, preferably in the oil industry or similar process industry, such that the incumbent is clearly recognized as an expert. Must have a thorough knowledge of engineering practices and economic principles, calculation methods, design details, U.S. & Int?l Codes, Standards and Specifications.

DCS Engineers
MINIMUM REQUIREMENTS: Education: BS Engineering. Experience: Position requires ten (10) years experience in construction or associated engineering fields, preferably in the oil industry or similar process industry. Language Requirements: A Knowledge of the Arabic language desirable but not required. Other: (1) A well rounded knowledge of project management, cost control and cost estimating , (2) Must be completely familiar with building, utility and piping codes, (3) should be well informed on Standard Safety practices.

DUTIES/RESPONSIBILITIES: Successful candidate will be expected to: Plans, schedules and provides work direction as required for preparation of designs, processes, reports, correspondence and related data and assures the efficiency, adequacy and conformance to overall objectives of alt phases of very complex engineering problems. Support the development and formulates the basis fore engineering studies in any several basic or special engineering fields by analyzing and evaluating all data pertinent to problems. Evaluates data as to scope, effect on existing installations, economic value, long rang planning and budgetary considerations. Leads the activists of project proposal that include development of scope, functions, interrelationship, integration, physical solution definition, cost estimate, etc. Leads project execution for project proposal, initiative, studies and continuous improvement of solutions and problem solvers. Initiates detailed work outline and makes decision as basic approaches, processes and / or equipment. Performs work and / or delegates work to other engineers for final development of specialized or technical proposals and proposed projects. Brings all elements of projects together, makes certain that all elements proceed satisfactory on schedule and within the money allowed and initiates corrective action as required. Reviews cost estimates, recommendation from vendors, consultants, and licensors. Discusses, coordinates and resoles problems with personnel throughout Aramco and subsidiaries and with outside of company organizations. Acts as technical consultant when required. Recommends new installations or modifications to improve existing facilities and standardization within broad field of endeavor. Estimates costs, prepares justifications and completes expenditure requests as required. Reviews work of engineers directed. Checks that reports are written according to established methods of good report presentation. Takes recommendations for further study or report change. Approves report for transmittal to supervisor. Develop scope and description of technology items, and leads the implementation and operation of developed solutions in the field.

MINIMUM REQUIREMENTS: Education: BS Engineering. Experience: Position requires ten (10) years experience in construction or associated engineering fields. Language Requirements: A Knowledge of the Arabic language desirable but not required. Other: (1) A well rounded knowledge of project management, cost control and cost estimating, (2) Must be completely familiar with Aramco building, Utility and piping codes, (3) Must be familiar with Aramco Budgeting and Accounting procedures, (4) should be well informed on Standard Safety practices.
DUTIES/RESPONSIBILITIES: Successful candidate will be expected to: Experience with design + construction of Oil & Gas Facilities and related Projects. Plan, schedule and provide work direction as required for preparation designs, reports, correspondence and related data and assurance the efficiency, adequacy and conformance of overall objectives of all phases of very complex engineering problems. Formulate the dosing basis by collecting, analyzing information and date relative to operating requirements, process economic considerations and such other pertinent factors as may be involved as a preliminary step in support of proposals for new construction modification or maintenance to equipment. Design or study mechanical modification to gas processing, gas handling and utility facilities. Occasionally called upon to design mechanical aspects of new faculties of the type mentioned. Participate in construction activities, pre-commissioning, commissioning and function test activities for the new projects. Follow and inspect the construction progress of assigned projects assuring conformance with design specifications, codes and standard, recommend or confirm design changes material and equipment substitutes. Review design packages and capital projects. Interface with the project Management Teams (PMT) Consulting Services & Inspection Departments, capital project contractors, equipment manufactures and Saudi Aramco proponents. Perform a variety of related work such as initiating reports , correspondence and faxes relative to assigned projects , assembling performance date and conduction studies relative to the development procumbent or adaptation of equipment, interpreting the mining and application of codes and standards, reviewing operating procedures and safety instruction, acting and safety instructions, acting as technical consultant on operating problems. Assist other engineers in the solution of problems outside their specialty.

Mechanical Engineer
MINIMUM REQUIREMENTS: EDUCATION: B.S. in Engineering. EXPERIENCE: Seven (7) years in the oil industry or similar process industry. Experience must be such that the incumbent is clearly recognized as being capable of project and design assignments. A thorough knowledge of English is required to perform analyses and studies in depth, make professional presentations and keep up with technical advancements; Arabic not required but considered desirable for American incumbents in this position. Must have a thorough knowledge of engineering practices and economic principles, calculation methods, design details, US and Aramco Codes, Standards and Specifications. Experience with design and construction of Oil & Gas Facilities and related Projects.

? The successful candidate will be expected to: Plan, schedule and provide work direction as required for preparation designs, reports, correspondence and related data and assurance the efficiency, adequacy and conformance of overall objectives of all phases of very complex engineering problems. Formulate the dosing basis by collecting, analyzing information and date relative to operating requirements, process economic considerations and such other pertinent factors as may be involved as a preliminary step in support of proposals for new construction modification or maintenance to equipment. Design or study mechanical modification to gas processing, gas handing and utility facilities , Occasionally called upon to design mechanical aspects of new faculties of the type mentioned . Participate in construction activities, pre- commissioning, commissioning and function test activities for the new projects. Study mechanical modification, follow and inspect the construction progress of assigned projects assuring conformance with design specifications, codes and standard, recommend or confirm design changes material and equipment substitutes. Review design packages and capital projects. Interface with the project Management Teams (PMT) Consulting Services & Inspection Departments, capital project contractors, equipment manufacturers and Saudi Aramco proponents. Perform a variety of related work such as initiating reports, correspondence and faxes relative to assigned projects, assembling performance date and conduction studies relative to the development procumbent or adaptation of equipment , interpreting the mining and application of codes and standards , reviewing operating procedures and safety instruction, acting and safety instructions, acting as technical consultant on operating problems. Assist other engineers in the solution of problems outside their specialty.

Mechanical Engineer
MINIMUM REQUIREMENTS: EDUCATION: B.S. Engineering. EXPERIENCE: Experience: Position requires Seven (7) years experience in construction or associated engineering fields. Language Requirements: A Knowledge of the Arabic language desirable but not required. Other: (1) A well rounded knowledge of project management, cost control and cost estimating, (2) Must be completely familiar with Aramco building, Utility and piping codes, (3) Must be familiar with Aramco Budgeting and Accounting procedures

DUTIES/RESPONSIBILITIES: Successful candidate will be expected to: Experience with design + construction of Oil & Gas Facilities and related Projects. Plan, schedule and provide work direction as required for preparation designs, possess, reports, correspondence and related data and assurance the efficiency, adequacy and conformance of overall objectives of all phases of very complex engineering problems. Formulate the dosing basis by collecting, analyzing information and date relative to operating requirements, process economic considerations and such other pertinent factors as may be involved as a preliminary step in support of proposals for new construction modification or maintenance to equipment. Design or study mechanical modification to gas processing , gas handing and utility facilities , Occasionally called upon to design mechanical aspects of new faculties of the type mentioned . Participate in construction activities, pre-commissioning, commissioning and function test activities for the new projects. Follow and inspect the construction progress of assigned projects assuring conformance with design specifications, codes and standard, recommend or confirm design changes material and equipment substitutes. Review design packages and capital projects. Interface with the project Management Teams (PMT) Consulting Services & Inspection Departments, capital project contractors, equipment manufactures and Saudi Aramco proponents. Perform a variety of related work such as initiating reports, correspondence and faxes relative to assigned projects , assembling performance date and conduction studies relative to the development procumbent or adaptation of equipment , interpreting the mining and application of codes and standards, reviewing operating procedures and safety instruction, acting and safety instructions, acting as technical consultant on operating problems. Assist other engineers in the solution of problems outside their specialty.

Mechanical Engineer
MINIMUM REQUIREMENTS: EDUCATION: B.S. Mechanical Engineering. EXPERIENCE: Nine (9) years, preferably in the oil industry or similar process industry, such that the incumbent is clearly recognized as an expert. Must have a thorough knowledge of engineering practices and economic principles, calculation methods, design details, U.S. Codes, Standards and Specifications.

DUTIES/RESPONSIBILITIES: Plans, schedules and provides work direction as required for preparation of designs, processes, reports, correspondence and related data and assures the efficiency, adequacy and conformance to overall objectives of alt phases of very complex engineering problems. Support the development and formulates the basis for engineering studies in any of several basic or special engineering fields by analyzing and evaluating all data pertinent to problems. Evaluates data as to scope, effect on existing installations, economic value, long range planning and budgetary considerations. Leads the activists of project proposal that include development of scope, functions, interrelationship, integration, physical solution definition, cost estimate, etc. Leads project execution for project proposal, initiatives, studies and continuous improvement of solutions and problem solvers. Initiates detailed work outline and makes decision as to basic approaches, processes and/or equipment. Performs work and/or delegates work to other engineers for final development of specialized or technical proposals and proposed projects. Brings all elements of a project together, makes certain that all elements proceed satisfactorily on schedule and within the money allowed; and initiates corrective action as required. Reviews cost estimates, recommendation from vendors, consultants, and licensors. Discusses, coordinates and resolves problems with personnel throughout Aramco and subsidiaries and with outside of company organizations. Acts as technical consultant when required. Recommends new installations or modifications to improve existing facilities and standardization within broad fields of endeavor. Estimates costs, prepares justifications and completes expenditure requests as required. Reviews work of engineers directed. Checks that reports are written according to established methods of good report presentation. Takes recommendations for further study or report changes. Approves reports for transmittal to supervisor. Has working knowledge of Saudi Aramco Standards and Specifications to review and provides consultation to proponent and project representatives related to their interpretation/ application of the standards in area of expertise. Develop scope and description of technology items, and leads the implementation and operation of developed solutions in the field.

Mechanical Engineer
POSITION DESCRIPTION: Successful candidate will be expected to: Have Experience with design and construction of Oil & Gas Facilities and related Projects. Plan, schedule and provide work direction as required for preparation designs, possess, reports, correspondence and related data and assurance the efficiency, adequacy and conformance of overall objectives of all phases of very complex engineering problems. Formulate the dosing basis by collecting, analyzing information and date relative to operating requirements, process economic considerations and such other pertinent factors as may be involved as a preliminary step in support of proposals for new construction modification or maintenance to equipment. Study mechanical modification to gas processing, gas handing and utility facilities. Occasionally called upon to design mechanical aspects of new faculties as requested. Participate in construction activities, pre-commissioning, commissioning and function test activities for the new projects. Study mechanical modification. Follow and inspect the construction progress of assigned projects assuring conformance with design specifications, codes and standard, recommend or confirm design changes material and equipment substitutes. Review design packages. Interface with the Project Management Teams (PMT) Consulting Services & Inspection Departments, capital project contractors, equipment manufactures and Saudi Aramco proponents. Perform a variety of related work such as initiating reports, correspondence and faxes relative to assigned projects, assembling performance date and conduction studies relative to the development procumbent or adaptation of equipment , interpreting the mining and application of codes and standards, reviewing operating procedures and safety instruction, acting and safety instructions, acting as technical consultant on operating problems. Assist other engineers in the solution of problems outside their specialty.

SELECTION CRITERIA: Education: BS Engineering. Experience: Position requires ten (10) years experience in construction or associated engineering fields. A well rounded knowledge of project management, cost control and cost estimating, and should be well informed on Standard Safety practices.

Mechanical Engineer
POSITION DESCRIPTION: Successful candidate will be expected to: Experience with design + construction of Oil & Gas Facilities and related Projects. Plan, schedule and provide work direction as required for preparation designs, possess, reports, correspondence and related data and assurance the efficiency, adequacy and conformance of overall objectives of all phases of very complex engineering problems. Formulate the dosing basis by collecting, analyzing information and date relative to operating requirements, process economic considerations and such other pertinent factors as may be involved as a preliminary step in support of proposals for new construction modification or maintenance to equipment. Design or study mechanical modification to gas processing, gas handing and utility facilities. Occasionally called upon to design mechanical aspects of new faculties of the type mentioned . Participate in construction activities, pre-commissioning, commissioning and function test activities for the new projects. Design or study mechanical modification. Follow and inspect the construction progress of assigned projects assuring conformance with design specifications, codes and standard, recommend or confirm design changes material and equipment substitutes. Review design packages and capital projects. Interface with the project Management Teams (PMT) Consulting Services & Inspection Departments, capital project contractors, equipment manufacturers and Saudi Aramco proponents. Perform a variety of related work such as initiating reports, correspondence and faxes relative to assigned projects, assembling performance date and conduction studies relative to the development procumbent or adaptation of equipment, interpreting the mining and application of codes and standards, reviewing operating procedures and safety instruction, acting and safety instructions, acting as technical consultant on operating problems. Assist other engineers in the solution of problems outside their specialty.

SELECTION CRITERIA: Education: Graduate Engineer. Experience: Position requires ten (10) years experience in construction or associated engineering fields. Language Requirements: A Knowledge of the Arabic language desirable but not required. Other: (1) A well rounded knowledge of project management, cost control and cost estimating , (2) Must be completely familiar with Aramco building, Utility and piping codes, (3) Must be familiar with Aramco Budgeting and Accounting procedures,(4) should be well informed on Standard Safety practices.

Mechanical Engineer
MINIMUM REQUIREMENTS: EDUCATION: B.S. Engineering. EXPERIENCE: Nine (9) years, preferably in the oil industry or similar process industry, such that the incumbent is clearly recognized as an expert. Must have a thorough knowledge of engineering practices and economic principles, calculation methods, design details, U.S. and Aramco's Codes, Standards and Specifications. Candidate must have a strong background in mechanical engineering design with emphasis on project management and contract administration. Candidate must have experience in design of mechanical systems such as HVAC, plumbing, fire protection and petrochemical piping. Candidate must be fluent in spoken and written English. Candidate must have basic knowledge in other design disciplines.

Duties and responsibilities will include: Manages projects in design stage with GES contractors. Reviews design packages, resolve issues with Saudi Aramco organizations and GES contractors. Performs miscellaneous related duties as assigned.

Mechanical Engineer
MINIMUM REQUIREMENTS: Education: BS Mechanical Engineering. Experience: A seven (7) year work experience in the area of rotating and static mechanical equipments. Fully conversant in the English language with good demeanor that can apply in a multi-cultural working environment. Preference to working in gas plants or in a plant environment dealing with mechanical equipments.

DUTIES/RESPONSIBILITIES: A Mechanical engineer role that will be working on design & installation of Gas treatment plants (LP DGA), Natural Gas Liquid (NGL) plant and Gas compression areas. The work will involve the following: Review design specifications produced by the design contractor for rotating equipments. Review new design parameters (spec sheets) for modifications required to accommodate Manifa Gas and condensate streams. Participate in engineering design reviews for all mechanical scope of the project. Insure that Saudi Aramco standards and specifications are adhered to prior to issuance of design packages. Plan mechanical work pre-commissioning sequence and durations. Insure that mechanical equipment procured for the gas processing expansion meets project requirements. Coordinate with appropriate Saudi Aramco organizations, i.e. Facilities Planning, Consulting Services and Inspection departments.

Mechanical Engineer
MINIMUM REQUIREMENTS: Education: B.S. Mechanical Engineering or Chemical Engineering. Experience: Minimum of nine years, preferably in the oil industry or similar process industry, such that the incumbent is clearly recognized as an expert. Must have a thorough knowledge of engineering practices and economic principles, calculation methods, design details, U.S. and Saudi Aramco's Codes, Standards and Specifications. Excellent communication skills.

DUTIES/RESPONSIBILITIES: Execute capital projects according to the scope, schedule and budget for Upgrade NA Flares System Unit / NAOO & BGP Projects Division, NAPD. Full responsibility for project development, from preliminary engineering, detail designs to construction and final a full and safe turnover to proponent. Has working knowledge of Saudi Aramco Engineering Standards and Specifications to review and provides consultation, technical support related to their interpretation/application of the standards in incumbent's area of expertise. Manage General Engineering Services (GES) design contractor activities of developing project proposal that include defining project work scope and schedule requirement, and development of detailed estimate leading to the ER appropriation and approval. Develop and prepare the contracting plan and strategy for solicitation, evaluation and award contractor for detail engineering, procurement and construction. Manage contractor for preparation of detailed design drawings, material specifications and procurement, and/or construction bid package. Coordinate activities and resolve issues among proponent, contractors and other parties to allow construction activities progress leading final mechanical completion. Responsible to secure Mechanical Completion Certificate (MCC) and Performance Acceptance Certificate for the project.

Mechanical Engineer - Offshore
POSITION DESCRIPTION: Emphasis on coordinating all Project Management activities related to engineering, procurement and installation of offshore facilities including platforms, submarine cables, pipeline and other structural facilities. Familiar with Industry Codes and Standards for Offshore Engineering and Design Practices. Interfaces with the Proponent Representatives, Saudi Aramco support organizations, and Contractors as required including attending FAT at vendor locations. Performs a variety of assignments such as initiating reports, correspondence related to assigned project, assembling data and conducting studies related to project development.

SELECTION CRITERIA: Mechanical Project Engineer with understanding of project management requirements including development of material and equipment specifications, engineering and construction of new oil production facilities required to execute the work along with the associated processes. Exposure to offshore engineering concepts and strategies. Demonstrated skill in interpersonal relationship with project team and other stakeholders through direct interface.

COMMENTS: Northern Area Projects Department is involved with various construction projects such as Refineries, Gas Projects, Terminals, Offshore and Marine facilities. The Department is located in West Admin. Building in Ras Tanura, Saudi Arabia.

EDUCATION: B.S. in Engineering. EXPERIENCE: Nine (9) years, preferably in the oil industry or similar process industry, such that the incumbent is clearly recognized as an expert in incumbent's field. LANGUAGE REQUIREMENTS: No second language is required. OTHER: Must have a thorough knowledge of engineering practices and economic principles, calculation methods, design details, U.S. and Aramco's Codes, Standards and Specifications.

Meanical Project Engineer
MINIMUM REQUIREMENTS: Education: BS Mechanical Engineering. Experience: Ten (10) years of professional experience, preferably in the oil or similar process industry. Must have a thorough knowledge of engineering practices and economic principles, calculation methods, design details, US and Aramco Codes, Standards and Specifications.

DUTIES/RESPONSIBILITIES: Plan, schedule and provide work direction as required for preparation designs, processes, reports, correspondence and related data and assurance the efficiency, adequacy and conformance to overall objectives of all phases of very complex engineering problems. Formulate the design basis by collecting, analyzing information and data relative to operating requirements, process, economic considerations and such other pertinent factors as may be involved as a preliminary step in support of proposals for new construction modifications or maintenance to equipment. Experience with Rotating Equipment (Compressors & Pumps). Design or study mechanical modifications to gas processing, gas handling and utility facilities. Occasionally called upon to design mechanical aspects or new facilities of the type mentioned. Participate in construction activities, pre- commissioning, commissioning and function test activities for the new projects. Follow and inspect the construction progress of assigned projects assuring conformance with design specifications, codes and standards; recommend or confirm design changes, material and equipment substitutes. Review design packages and capital projects. Interface with the Project Management Teams (PMT) Consulting Services & Inspection Departments, capital project contractors, equipment manufactures and Saudi Aramco proponents. Perform a variety of related work such as initiating reports, correspondence and faxes relative to assigned projects, assembling performance data and conducting studies relative to the development, procurement or adaptation of equipment; interpreting the meaning and application of codes and standards, reviewing operating procedures and safety instructions; acting as technical consultant on operating problems.

Drilling Engineers NEED ASAP NEED 10 of them for Saudi Arabia
Will live in Saudi but work 14 days on/7 days off, get base, uplift, site allowance & overtime.
Education: BS in Petroleum Engineering Should net to $180K/yr
Experience: Eight (08) years experience in drilling engineering. Extensive knowledge of deep high pressure gas wells and the design of vertical, horizontal and multilateral oil and gas wells. Knowledge and experience in the application of new drilling technology and under-balanced drilling are desirable.

DUTIES/RESPONSIBILITIES:
Writes drilling and workover programs for oil development, gas and water wells. Writes well completion reports. Monitors daily drilling operations and provides technical and engineering support to drilling operations. Evaluates new drilling equipment and procedures to reduce cost and increase drilling efficiency. Initiates studies to solve drilling problems and recommends ideas to enhance drilling performance.

3 positions open] COMMUNICATION ENGINEERS Saudi: Base $80/120K +o'seas pkg, tax protected, savings & super retirement progs. Family status, career jobs. Mandatory retirement @ 60: want guys w/ 10 yrs left to work, American or Canadian citizens!! Not green card types.

Communication Engineers $80-120K Saudi Arabia
Responsibilities include sizing specifying communication system such as data, telephone, wireless, transmission and facilities. Be involved with CAD MicroStation and Network Engineer (for copper and fiber cable systems) development, installation details, schematics, one-lines, network diagrams, input/output schedules and other drawings. In addition be involved with. Developing communication network strategies, wiring proposal, functional and detailed design specifications. Prepare conceptual design packages and engineering budgetary cost estimates. Responsibilities include providing technical services to Maintenance and Operations Divisions with regard to communication systems, assess plant facilities & process arrangements, and recommending new installations or modifications to improve plant control performance or replacement of defective or communication systems. Serve in technical lead role on communication systems implementations. Review design drawing and engineering specifications to produce review comments and perform quality assurance assessments. Communicate with equipment vendors and technical consultants to resolve complex issues concerning new technology, upgrade of equipment, revision to standards and purchase specifications, test procedure and new projects designs. Provide mentoring and transfer knowledge, skills and experience to entry level engineers and designers.

Selection Criteria: Education: BS Engineering. Experience: Positions requires seven+ & ten+ years min. exp. in ; the oil or similar process industry; construction or associated engineering fields. Language Requirements: A Knowledge of the Arabic language desirable but not required. Other: A well rounded knowledge of project management, cost control and cost estimating. Must be completely familiar with US building, Utility and piping codes. Must be familiar with Budgeting and Accounting procedures. Should be well informed on Standard Safety practices.

? Long-term family status in safe Western Compound w/ schools, hospitals, golf country club, beach, yacht and horse clubs, 40 hour work week, little travel, 42 days vacation w/ airfare, etc. Full major co. benefits, world's finest retirement pkg., etc. Western style homes at very little cost. Great place to raise kids...super private schools, no crime, no drugs. Contact me for details. Co. has never had a dangerous incident in any of their compounds in 60 years. Note Client has mandatory retirement at 60. A senior guy who spends 10+ years before early retiring from this company, at current $ rates, can easily return to the USA w/ $2/3+ million in his pocket as a result of their paid or low cost COL items and their retirement program.

Will interview from your city through video-teleconferencing. Then a paid trip to Houston, TX with your wife (if you have one) to speak with many expatriots about living conditions, meet many managers and see videos of facilities and living conditions, which are really nice western style homes (excellent schools, no crime, no drugs, scouting, movie theaters, cultural events, etc.) all before you would answer regarding any offer you may receive.

Willing to relocate.

Barbara Badon
Badon?s Employment, Inc.
5422 Galeria Drive
Baton Rouge, LA 70816
225 295 1240
225 295 3972 fax
resumes@Badon.com
http://www.badon.com
http://www.refineryengineers.com
Online Application:
https://www.notarypublic.com/secure/badonsemployment/form.cfm? marked=&CFID=1051051&CFTOKEN=35617238

We are a US National Recruiting Firm based in Louisiana, catering mainly to the Drilling, Offshore, and Reservoir, Refining and Petrochemical Industries in the Gulf of Mexico Corridor, although also serving locations all over the country and worldwide. We have many positions open for Degreed Engineers for Major Companies with experience in the Chemical, Petrochemical and Oil Refining Industries.

Our Clients need Chemical Engineers, Mechanical Engineers and Electrical Engineers among others with experience with Oil Refining, Chemicals, Specialty Chemicals, Plastics, Polymers, Packaging, etc.

We have positions for Degreed Engineers with Good GPA's and up to 30 + years of experience.

Environmental Engineer?Baton Rouge, LA
JOB DESCRIPTION AND DUTIES
Pay range $85-100K Plus Excellent Bonus and Benefits

Develops and maintains systems to manage and monitor environmental compliance, prepares and submits federal, state and other applicable reports such as Title V compliance and deviation, SARA 313, Emission Inventories, NSPS, MACT, other regulatory/compliance reports, and effectively communicates regulatory and permit requirements to departments within the refinery. Ensures Spill/Upset/Emission Event/Reporting requirements are satisfied in accordance with all regulations. Acquires, records and retains records necessary to demonstrate compliance with assigned environmental regulations. Reports emission control equipment inspections and testing to all governing agencies, assists with regulatory permitting tasks, and generates all necessary reports to support and demonstrate compliance. Develops and provides environmental training to employees. Follows all safety rules and guidelines established by the Refinery and participates in safety meetings, safety programs, field safety audits, and VPP inspections.

MINIMUM POSITION QUALIFICATIONS
Bachelor of Science in Engineering or related Science degree required. Prefer 5+ years environmental engineering or related experience in a petrochemical or chemical operating environment required or refinery. A strong background in air emission compliance highly desirable. Must have the ability to work in a team environment, use a computer with extensive knowledge of Microsoft Office Suite, Water9, Tanks 4.09, ApenTech Process Explorer, LeakDAS and LabWorkBench. Must have the ability to take 24 hour call, travel by common carrier, work extended hours including weekends and holidays, rotate weekend call, and make presentations to groups.

If this Position does not fits your current needs, please help me in fulfilling my Client?s need by forwarding to someone who fits the description. Thanks for your assistance in networking with me.

Forward Resume to:
Barbara Badon, President
National Recruiter
Badon?s Engineering Division
***>>>PLEASE EMAIL TO: Barbara@Badon.com
www.RefineryEngineers.com/www.Badon.com
Phone: 1-800-769-7708
We do Searches for Companies all across the US
International partner offices in the U.K., Canada,
Continental Europe, Australia, Japan, China,
Hong Kong, Singapore, South. Korea, Qatar &
Saudi Arabia
REFINERY PROCESS ENGINEER - Baton Rouge, LA
Our client a Louisiana Refinery is in need of a Refinery Process Engineer with experience in or knowledge of installation of crude and vacuum distillation units, delayed cokers, heavy gas oil hydrocrackers, reformers, kerosene hydrotreaters and construction of infrastructure and other process units.

Responsibilities:
" Provide Process Engineering support during the detailed engineering, construction and startup phases.
" Coordination of detailed process design with selected contractors for the project.
" Review, check and verification of outside contractor process design work product.
" Participate in P&ID, HAZOP, SIL reviews.
" Coordinate review of vessel internal designs with Technologists.
" Assist in development of operating and emergency response procedures. " Participate in punch-out of construction packages.

B.S. in Chemical Engineering required and 5 plus years of Refinery process engineering experience needed. Also extensive computer experience including PI Process Book, MS Project, MS Office products including Word, Excel, Excel Macros, and Hisys are required.

Engineers hired now will become Managers in the next 5-10 years. Excellent People Oriented Corporate Culture, Excellent Benefits! Absolutely a Great Place to work!!

Also, other similar positions available in other locations around the country!

Apply online:
https://www.notarypublic.com/secure/badonsemployment/form.cfm? marked=&CFID=1051051&CFTOKEN=35617238

Barbara Badon
Badon's Employment, Inc.,
Engineering Division
225 295 1240
Barbara@badon.com
www.refineryengineers.com
www.badon.com

Sr. Refinery Process Engineer, Baton Rouge, LA
Prepare reports on catalyst life, performance, regeneration, and requirements of the units. Make studies on the effects of operating variables on product quality, yield and profitability. Keep and evaluate operating history of units. Write process specifications based on studies for problem solving, optimization, or new projects. These include process flow diagrams, heat and material balances, and instrumentation. Evaluate the economic feasibility of new projects. Provides Process Engineering function during engineering and construction projects.

Supply technical data in preparation of construction, operating, and environmental permit applications and reports. Assist Operations in evaluations of unit operations and troubleshooting problems. Provide guidance and a technical resource for younger engineers. Prepare monthly formal report, and formal reports on specific subjects, informal discussions, and a weekly process group.

Requirements: Bachelor's degree in Chemical Engineering required. 5+ years refinery process engineering experience, operations and maintenance positions required.

Barbara Badon
Badons Employment, Inc.
5422 Galeria Drive
Baton Rouge, LA 70816
225 295 1240
resumes@Badon.com
http://www.badon.com
http://www.refineryengineers.com

Embedded Software Engineer-$60-70K - Gulf Coast area
BS Degree and C/C++ Coding experience necessary. Will be developing the capability to achieve 3D shallow-water seafloor imaging. As part of a team, the employee will participate in the design and building of a new generation of bathymetric LIDAR systems.
- Interface design and configuration of amplifiers, drivers and digitizers. Develop protocols for storage of acquisition data to memory. Develop data recording, structures and software and integrate new modules or components into embedded systems.
- Development of custom client/server architectures utilizing TCP/IP and UDP protocols.
- Knowledge of analog to digital signaling and digital signal processing techniques.
- Embedded master micro-controller/computer for syncing all synchronous elements in an embedded system, strong preference to electro-optic systems.
- Develop code in `C/C++` and/or other languages such as Tcl/Tk , Perl, Java, etc.
- Knowledge of software data structures and/or object oriented programming concepts.
- Proficiency with the use and maintenance of revision control systems such as CVS or subversion.
- Hands on experience in electronic and embedded system prototyping and assembly.
- Printed circuit board design and/or FPGA design/programming.

Requirements:
- B, Software, Computer, or Electrical Engineering or CS and 2-5 years of experience in electronic / embedded systems design (design, implementation, testing deployment) - C/C++ Programming skills
- Experience in embedded software/driver design preferably in a Linux environment desired
- Must be a U.S. Citizen or Permanent Resident with work authorization in the US -

Indiana - Ohio area
Sr. RF Engineer
, $75- $90
Design of RF subsystems for miniature low power designs in the VHF-5 GHz frequency range. Lead Engineer with proven creativity, design theory problem solving. Use of circuit modeling, software to analyze design prior to layout; and VCO's, synthesizers, filters, power amplifers, upconverters and down converters,

Digital Design Engineer, $70-$85
This is a complex development and design role. BS/MS level preferred Applications for wireless communications systems and components. Conduct testing and creste models and prototypes. Course work or experience indicating a strong background in digital signals communications processing Hw or SW--

Sr. Test Engineer, $65-$78 +
Design, develop and implement cost effective methods of testing and troubleshooting systems and equipment. Prepares tests and diagnostic programs, design test fixtures, equipment. Completes specifications and procedures for testing new products. Plan the labor, schedules and equipment required fot testing and evaluating standard and specials devices. Any defense systems testing a plus? +++ this position can be filled at a higher grade level based on applicant's skills and experience.

Software Engineer, $65-$78
BSCE or BSEE experience with C and C++ programming. Software design theory and processes?.. Co-design of HW & SW Must be familiar with VHDL, FPGA, VLSI design and test automation SCA, CASE, UML and object oriented programming languages and systems.

All candidates must be US Citizen and be able to obtain security clearance.
This is a very progressive work environment designed to appeal to high level performers. Flex hours and very top benefit programs?..

Barbara Badon
Badon's Employment, Inc.
5422 Galeria Drive
Baton Rouge, LA 70816
225 295 1240
225 295 3972 fax
Resumes@Badon.com
http://www.badon.com/
http://www.refineryengineers.com/
Online Application:

https://www.notarypublic.com/secure/badonsemployment/form.cfm? marked=&CFID=1051051&CFTOKEN=35617238

We are a US National Recruiting Firm based in Louisiana, catering mainly to the Refining and Petrochemical Industries in the Gulf of Mexico Corridor, although also serving locations all over the country and worldwide. We have many positions open for Degreed Engineers for Major Companies with experience in the Chemical, Petrochemical and Oil Refining Industries.

Our Clients need Chemical Engineers, Mechanical Engineers and Electrical Engineers among others with experience with Oil Refining, Chemicals, Specialty Chemicals, Plastics, Polymers, Packaging, etc.

We have positions for Degreed Engineers with Good GPA's and up to 30 + years of experience.

Refinery Positions Available in Saudi Arabia Now!!! Please send your resume and salary history NOW!!!!!! Click Apply!

ChE's - ME's - EE's! 5 Refineries Seek!
Locations: Gulf Coast, Gulf South, Northeast, Northwest, Midwest, sometimes Overseas.

These Companies have been our Clients for years and they have ongoing needs. Over a period of time, and Successful Placements, we have developed close relationships with them. This gives us the opportunity to Open Doors, to Showcase Your Resume and your unique skills to the Right Hiring Managers.


CURRENT OPENINGS

  • Jr. and Sr. Process Engineers, FCC, Hydrotreater or other Major refinery units, with 1-20+ years experience, Minimum 3 years direct work for Oil Refinery;

  • Several Process Control Engineers, Honeywell TDC 3000, DCS, PLC's, Several Advanced Process Control Engineers, Multivariable Controls, DMC, Neural Network;

  • Need Several Economics & Planning Engineers, PIMS needed;

  • Several E&I Maintenance Superintendents; EE degree, Honeywell and Supervision required;

  • Sr. Maintenance Fixed Equipment Engineers, Inspectors, ME degreed and non-degreed;

  • Several ME / Project Engineers, 5-20 + years experience;

  • EE/E&I Maintenance/Project Engineer;

  • Several EE Instrumentation Project Engineers;

  • Several Environmental Engineers, Refinery experience;

  • Welding Engineers, degreed in Metallurgy or ME, Corrosion and Inspection issues;

  • Maintenance Superintendent, ME 10 years, non-degreed 20 years.


TO QUALIFY

All Candidates must have a 4 year degree, have above average skills in the Field and have a minimum of 1-3 years employed directly with an Oil Refinery (not as a contract employee), as designated by the Client Company.




All contents of this site Copyright © 2000 Badon's Employment, Inc. All Rights Reserved.

Visit GHOST in the MACHINE!